Release Notes

Release Notes for Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.7 5
Release Notes
CSCti29546 SPA303 /
SPA50X
(except
SPA501)
Softkey behavior differs from SPA525G. Example:
<PSK_3 ua="na">fnc=sd;ext=*60;vid=1;nme=MOH Off</PSK_3>
had to be modified to
<PSK_3 ua="na">fnc=sd;ext=*60@$PROXY;vid=1;nme=MOH Off</
PSK_3>
Corrected behavior now allows
<PSK_3 ua="na">fnc=sd;ext=*60;vid=1;nme=MOH Off</PSK_3>
and the phone automatically applies @PROXY.
CSCti31524 SPA50X
(except
SPA501) with
SPA500S
When using the SPA500S to perform a Group Call Pickup, a second
incoming call cannot be picked up.
CSCti31574 SPA303/
SPA50X
(except
SPA501)
A programmable softkey configured for all-group [multicast] speed
dial does not work when configured as follows:
fnc=sd;ext=800;vid=1;nme= All Page
CSCti51224 SPA303/
SPA50X
(except
SPA501)
HTTPS used for contact, message, and logout in a line key's
extended function results in “request failed.”
CSCti58390 SPA303/
SPA50X
(except
SPA501)
When idle and configured with the following, the lcr idle-state
softkey is not displayed in position 6, but cfwd is displayed in
position 6:
Miss_Call_Shortcut: No
Log_Missed_Calls_For_EXT_1: Yes
Programmable_Softkey_Enable: Yes
<Idle_Key_List
ua="na">redial;dir;dnd;psk4;psk2;lcr;cfwd;chkcfwd;psk1;psk3;</
Idle_Key_List>
Identifier Phone Model Summary