Release Notes

Release Notes for Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.7 3
Release Notes
Accessibility Control for the Phone User Interface
Firmware release 7.4.7 allows you to restrict the menus and options that phone
users see when they use the phone interface. The Phone-UI-user-mode parameter
can be enabled in a provisioning file or in the configuration utility. For more
information, see Chapter 6, Provisioning Basics, of the
Cisco Small Business
SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
, and
Chapter 2 of the
Cisco Small Business IP Telephony Devices Provisioning Guide.
SIP “Reason” Header in CANCEL Message Support
Firmware version 7.4.7 includes support for the SIP “Reason” header in CANCEL
messages. No configuration is required.
Fixed Problems Since Firmware Version 7.4.6—Phones Used
With a SIP Call Control System
Identifier Phone Model Summary
CSCth67580 SPA30X/
SPA50X
Syslog messages report “upgrade” when a phone plays music via
an XML application.
CSCth69550 SPA50X When canceling a conference call, if canceling before dialing, user
had to manually resume call. If canceling the conference call after
dialing, the call automatically resumed. Different behavior occurs
when canceling one conference call. The fixed status is that when a
conference call is canceled, the phone will not resume the call
previously put on hold. This makes the SPA50X phones' behavior
consistent with the SPA525G's behavior.
CSCth69658 SPA301/
SPA501
Using the phone's interactive voice response (IVR) system to
disable SPCP did not save the selected mode.
CSCth71332 SPA301 Using the phone's IVR system to configure with 220 or 230 would
cause the SPA301 to immediately exit the IVR and dial the number.
CSCth71385 /
CSCti04979
SPA301/
SPA501
Cannot disable Web Server access with phone's IVR 7932#
command.
CSCth76144 SPA30X/
SPA50X
Speed dial in extended function fails if userID has period in it; for
example, fnc=sd;ext=a.b@192.168.2.181. Debug log showed
“Calling:@a.b:0.”