Release Notes

ManualsBrandsCisco ManualsIP phonesCisco SPA302DKIT Multi-Line DECT Handset with Base Station

Release Notes for Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.7 1

Release Notes

Release Notes for Cisco Small Business IP

Phone SPA50X and SPA30X Firmware

Version 7.4.7

December 17, 2010

These Release Notes describe the new updates and fixes in the Cisco Small

Business IP Phone SPA50X and SPA30X firmware version 7.4.7.

Contents

This document includes the following topics:

• Changes Since Cisco Small Business IP Phone SPA50X and SPA30X

Firmware Version 7.4.6

• Known Issues

• Related Information

Changes Since Cisco Small Business IP Phone SPA50X and

SPA30X Firmware Version 7.4.6

Updates were made and problems were fixed.

Summary of content (11 pages)

PAGE 1
Release Notes Release Notes for Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.7 December 17, 2010 These Release Notes describe the new updates and fixes in the Cisco Small Business IP Phone SPA50X and SPA30X firmware version 7.4.7. Contents This document includes the following topics: • Changes Since Cisco Small Business IP Phone SPA50X and SPA30X Firmware Version 7.4.
PAGE 2
Release Notes Updates Since Firmware Version 7.4.6 Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-MED) The Cisco SPA500 Series and Cisco SPA300 Series IP Phones support LLDP-MED for deployment with Cisco or other third-party network connectivity devices that use a Layer 2 auto-discovery mechanism. Implementation of LLDP-MED is done in accordance with IEEE 802.1AB (LLDP) Specification of May 2005, and ANSI TIA1057 of April 2006.
PAGE 3
Release Notes Accessibility Control for the Phone User Interface Firmware release 7.4.7 allows you to restrict the menus and options that phone users see when they use the phone interface. The Phone-UI-user-mode parameter can be enabled in a provisioning file or in the configuration utility.
PAGE 4
Release Notes 4 Identifier Phone Model Summary CSCth88233 SPA30X/ SPA50X Changing the Regional > Prompt Tone with the phone's web-UI did not take effect until the phone was manually rebooted. The change now takes effect without rebooting the phone. CSCth88793 SPA303/ SPA50X (except SPA501) PC port on phone did not properly change packet priority when VLAN priority 1 was configured.
PAGE 5
Release Notes Identifier Phone Model Summary CSCti29546 SPA303 / SPA50X (except SPA501) Softkey behavior differs from SPA525G. Example: fnc=sd;ext=*60;vid=1;nme=MOH Off had to be modified to fnc=sd;ext=*60@$PROXY;vid=1;nme=MOH Off Corrected behavior now allows fnc=sd;ext=*60;vid=1;nme=MOH Off and the phone automatically applies @PROXY.
PAGE 6
Release Notes 6 Identifier Phone Model Summary CSCti60766 SPA303/ SPA50X (except SPA501) When using a click-to-dial application, the phone being controlled displays “page from”. This behavior has been changed so that the phone now displays “From:”. CSCti78526 SPA30X/ SPA50X The phone hangs if the RTP packet size is set to >=50 ms. CSCti84953 SPA30X/ SPA50X The SIP proxy length field is changed from 127 to 255 characters.
PAGE 7
Release Notes Identifier Phone Model Summary CSCtj32326 SPA30X/ SPA50X Phone sends 200 OK ACK with only its first CODEC preference. The phone's behavior is now changed such that: 1. Set ExtN > Audio Configuration > Release Unused Codec: no 2. Phone's 200 OK responses to INVITE now include preferred CODEC list with the extension's preferred CODEC listed first.
PAGE 8
Release Notes Identifier Phone Model Summary CSCtj99684 SPA30X/ SPA50X In the SIP PUBLISH report, when Do Not Disturb is configured and a call is forwarded, the “from” and “to” ID are incorrect. CSCtk12261 SPA30X/ SPA50X In the SIP PUBLISH report, the remote port reported was reported as SIP. This has been corrected to report as RTP. CSCtk13789 SPA30X/ SPA50X Phone was unresponsive for two minutes while sending DNS address lookups for an unknown SIP proxy.
PAGE 9
Release Notes Identifier Phone Model Summary CSCti30982 SPA303 / SPA50X (except SPA501) Changing ring type using the French language dictionary causes the phone to hang. CSCtj93580 SPA303/ SPA50X (except SPA501) The “EditDial” softkey in the Personal Speed Dial menu does not work. Pressing other keys repeatedly resulted in phone halting.
PAGE 10
Release Notes Identifier Phone Model Protocol Description/Workaround CSCtk15125 SPA301/ SPA501 SIP Can't end IP dialing call when is disabled. Symptom: After call is answered using the speaker button, pressing speaker button again will not release the call. Workaround: CSCtk15169 SPA301/ SPA501 SIP Pressing the Line Key will release the call. Cannot answer IP dialing call while accessing IVR; phone freezes.
PAGE 11
Release Notes Related Information Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Cisco Small Business Support and Resources www.cisco.com/go/smallbizhelp Phone Support Contacts www.cisco.com/en/US/support/ tsd_cisco_small_business _support_center_contacts.html Cisco Small Business Firmware Downloads www.cisco.com/go/smallbizfirmware Select a link to download firmware for Cisco Small Business Products. No login is required.