Operation Manual
Administration Settings
Management
Cisco SPA100Series Administration Guide 109
1
TR-069
Use the Administration > Management > TR-069 page to configure communication with an
Auto-Configuration Server (ACS) via TR-069 CPE WAN Management Protocol (CWMP).
TR-069 (Technical Report 069) provides a common platform to manage all voice devices and
other customer-premises equipment (CPE) in large-scale deployments. It provides the
communication between the CPE and the ACS.
Web Utility Access Select the protocol to use for access to the configuration utility
from a device on the WAN side of the ATA. Choose HTTP and/
or HTTPS. For secure Internet access, select HTTPS. The
default value is HTTP.
Include the specified protocol when you enter the address in
your web browser. For example, with the HTTPS protocol, a
WAN IP address of 203.0.113.50, and the default Remote
Management Port of 80, you would enter: https://
203.0.113.50:80
Remote Upgrade If you enabled Remote Management, choose whether or not to
allow firmware upgrades from a device on the WAN side of the
ATA. Click Enabled to enable this feature, or click Disabled to
disable it. The default value is Disabled.
You can change this setting only when your computer is
connected to the configuration utility from the LAN.
Allowed Remote IP
Address
You can use this feature to limit access to the configuration
utility based on the IP address of a device. Choose Any IP
Address to allow access from any external IP address. To specify
an external IP address or range of IP addresses, select the second
radio button and then enter the desired IP address or range. The
default setting is Any IP Address.
Remote Management
Port
Enter the port number to use for access to the configuration
utility from a device on the WAN side of the ATA. The default
port number is 80.
Include the specified port when you enter the address in your
web browser. For example, with the HTTPS protocol, a WAN IP
address of 203.0.113.50, and the default Remote Management
Port of 80, you would enter: https://203.0.113.50:80
Field Description