Operation Manual

Configuring the Voice Settings
User 1 and User 2
Cisco SPA100 Series Administration Guide 103
1
VMWI Ring Policy The parameter controls when a ring splash is played when a the
VM server sends a SIP NOTIFY message to the ATA indicating
the status of the subscriber’s mail box. Three settings are available.
Default setting: New VM Available
• New VM Available: Ring as long as there new voicemail
messages.
• New VM Becomes Available: Ring at the point when the
first new voicemail message is received.
• New VM Arrives: Ring when the number of new voicemail
messages increases.
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive before the
VMWI signal is applied (0 – 10.0s)
Default setting: 0
Ring On No New
VM
If enabled, the ATA plays a ring splash when the voicemail server
sends SIP NOTIFY message to the ATA indicating that there are
no more unread voice mails. Some equipment requires a short ring
to precede the FSK signal to turn off VMWI lamp.
Default setting: no
Field Description