Operation Manual

Configuring the Voice Settings
User 1 and User 2
Cisco SPA100 Series Administration Guide 98
1
FXS Port Polarity Configuration
User 1 and User 2
Use the Voice > User 1 and Voice > User 2 pages to set the user preferences for the calls
through the PHONE 1 and PHONE 2 ports.
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Call Forward Settings
Field Description
Idle Polarity Polarity before a call is connected: Forward or Reverse.
Default setting: Forward
Caller Conn Polarity Polarity after an outbound call is connected: Forward or Reverse.
Default setting: Forward.
Callee Conn Polarity Polarity after an inbound call is connected: Forward or Reverse.
Default setting: Forward
Field Description
Cfwd All Dest Forward number for Call Forward All Service.
Default setting: blank
Cfwd Busy Dest Forward number for Call Forward Busy Service. Same as Cfwd
All Dest.
Default setting: blank
Cfwd No Ans Dest Forward number for Call Forward No Answer Service. Same as
Cfwd All Dest.
Default setting: blank
Cfwd No Ans Delay Delay in sec before Call Forward No Answer triggers.
Default setting: 20