Operation Manual

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 97
1
Dial Plan
The default dial plan script for the line is as follows: (*xx|[3469]11|0|00|[2- 9]xxxxxx|1xxx[2-
9]xxxxxx|xxxxxxxxxxxx.)
Each parameter is separated by a semi-colon (;)
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xy z
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
The syntax for a dial plan expression is described in the table below.
Modem Line Enable an alternate method to make the modem call without
Modem Line Toggle Code pre-dialing.
Default setting: no
RTP to Proxy in
Remote Hold
Enable to send RTP to proxy when line is held by remote side.
Default setting: no
Dial Plan Entry Functionality
*xx Allow arbitrary 2 digit star code
[3469]11 Allow x11 sequences
0Operator
00 Int’l Operator
[2-9]xxxxxx US local number
1xxx[2-9]xxxxxx US 1 + 10-digit long distance number
xxxxxxxxxxxx. Everything else
Field Description