Operation Manual

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 90
1
Supplementary Service Subscription
The ATA provides native support of a large set of enhanced or supplementary services. All of
these services are optional. The parameters listed in the following table are used to enable or
disable a specific supplementary service. A supplementary service should be disabled if a) the
user has not subscribed for it, or b) the Service Provider intends to support similar service
using other means than relying on the ATA.
Resident Online
Number
This setting allows you to associate a "local" telephone number
with this line using a valid Skype Online Number from Skype.
Calls made to that number will ring your phone. Enter the number
without spaces or special characters.
Default setting: blank
SIP URI The parameter by which the user agent will identify itself for this
line. If this field is blank, the actual URI used in the SIP signaling
should be automatically formed as:
sip:UserName@Domain
Where UserName is the username given for this line in the User
ID, and Domain is the domain given for this profile in the User
Agent Domain. If the User Agent Domain is an empty string, then
the IP address of the phone should be used for the domain.
If the URI field is not empty, but if a SIP or SIPS URI that contains
no @ character, then the actual URI used in the SIP signaling
should be automatically formed by appending this parameter with
an @ character followed by the IP address of the device.
Field Description
Call Waiting Serv Enable Call Waiting Service.
Default setting: yes
Block CID Serv Enable Block Caller ID Service.
Default setting: yes
Block ANC Serv Enable Block Anonymous Calls Service
Default setting: yes
Dist Ring Serv Enable Distinctive Ringing Service
Default setting: yes
Field Description