Operation Manual

Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 84
1
SIP GUID This feature limits the registration of SIP accounts. The Global
Unique ID is generated for each line for each ATA. When it is
enabled, the ATA adds a GUID header in the SIP request. The
GUID is generated the first time the unit boots up and stays with
the unit through rebooting and even factory reset.
Default setting: no
SIP Debug Option SIP messages are received at or sent from the proxy listen port.
This feature controls which SIP messages to log. The choices are
described below. Default setting: none
• none—No logging.
• 1-line—Logs the start-line only for all messages.
• 1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
• 1-line excl. NTFY—Logs the start-line only for all
messages except NOTIFY requests/responses.
• 1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
• 1-line excl. OPT|NTFY|REG—Logs the start-line only for
all messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
• full—Logs all SIP messages in full text.
• full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
• full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
• full excl. REG—Logs all SIP messages in full text except
REGISTER requests/responses.
• full excl. OPT|NTFY|REG—Logs all SIP messages in full
text except for OPTIONS, NOTIFY, and REGISTER
requests/responses.
RTP Log Intvl The interval for the RTP log.
Default setting: 0
Field Description