Operation Manual

Configuring the Voice Settings

Regional

Cisco SPA100 Series Administration Guide 76

Block ANC Deact

Code

Removes blocking of all anonymous calls.

Default setting: *87

DND Act Code Enables the do not disturb feature.

Default setting: *78

DND Deact Code Disables the do not disturb feature.

Default setting: *79

CID Act Code Enables caller ID generation.

Default setting: *65

CID Deact Code Disables caller ID generation.

Default setting: *85

CWCID Act Code Enables call waiting, caller ID generation.

Default setting: *25

CWCID Deact Code Disables call waiting, caller ID generation.

Default setting: *45

Dist Ring Act Code Enables the distinctive ringing feature.

Default setting: *26

Dist Ring Deact Code Disables the distinctive ringing feature.

Default setting: *46

Speed Dial Act Code Assigns a speed dial number.

Default setting: *74

Paging Code Used for paging other clients in the group.

Default setting: *96

Secure All Call Act

Code

Makes all outbound calls secure.

Default setting: *16

Secure No Call Act

Code

Makes all outbound calls not secure.

Default setting: *17

Secure One Call Act

Code

Makes the next outbound call secure. (It is redundant if all

outbound calls are secure by default.)

Default setting: *18

Secure One Call

Deact Code

Makes the next outbound call not secure. (It is redundant if all

outbound calls are not secure by default.)

Default setting: *19

Field Description