Operation Manual

Configuring the Voice Settings
Regional
Cisco SPA100 Series Administration Guide 75
1
Cfwd Last Act Code Forwards the last inbound or outbound call to the number that the
user specifies after entering the activation code.
Default setting: *63
Cfwd Last Deact
Code
Cancels call forwarding of the last inbound or outbound call.
Default setting: *83
Block Last Act Code Blocks the last inbound call.
Default setting: *60
Block Last Deact
Code
Cancels blocking of the last inbound call.
Default setting: *80
Accept Last Act
Code
Accepts the last outbound call. It lets the call ring through when do
not disturb or call forwarding of all calls are enabled.
Default setting: *64
Accept Last Deact
Code
Cancels the code to accept the last outbound call.
Default setting: *84
CW Act Code Enables call waiting on all calls.
Default setting: *56
CW Deact Code Disables call waiting on all calls.
Default setting: *57
CW Per Call Act
Code
Enables call waiting for the next call.
Default setting: *71
CW Per Call Deact
Code
Disables call waiting for the next call.
Default setting: *70
Block CID Act Code Blocks caller ID on all outbound calls.
Default setting: *67
Block CID Deact
Code
Removes caller ID blocking on all outbound calls.
Default setting: *68
Block CID Per Call
Act Code
Blocks caller ID on the next outbound call.
Default setting: *81
Block CID Per Call
Deact Code
Removes caller ID blocking on the next inbound call.
Default setting: *82
Block ANC Act Code Blocks all anonymous calls.
Default setting: *77
Field Description