Operation Manual

Configuring the Voice Settings
Regional
Cisco SPA100 Series Administration Guide 64
1
CA Settings
General Purpose Parameters
Regional
Use the Voice > Regional page to localize your system with the appropriate regional settings.
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Log Upgrade Success
Msg
Syslog message issued after a firmware upgrade attempt completes
successfully.
Default setting: $PN $MAC -- Successful upgrade $SCHEME://
$SERVIP:$PORT$PATH -- $ERR
Log Upgrade Failure
Msg
Syslog message issued after a failed firmware upgrade attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
License Keys This field is not currently used.
Field Description
Custom CA URL The URL of a file location for a custom Certificate Authority
(CA) certificate. Either the IP address or the FQDN of the
server can be specified. The file name can have macros, such
as $MA, which expands to the ATA MAC address.
Default setting: blank
Field Description
GPP A to GPP P General purpose provisioning parameters. These parameters can be
used as variables in provisioning and upgrade rules. They are
referenced by prepending the variable name with a ‘$’ character,
such as $GPP_A.
Default setting: blank
Field Description