Operation Manual

Configuring the Voice Settings
Provisioning
Cisco SPA100 Series Administration Guide 62
1
Profile Rule This parameter is a profile script that evaluates to the provisioning
resync command. The command is a TCP/IP operation and an
associated URL. The TCP/IP operation can be TFTP, HTTP, or
HTTPS.
If the command is not specified, TFTP is assumed, and the address
of the TFTP server is obtained through DHCP option 66. In the
URL, either the IP address or the FQDN of the server can be
specified. The file name can have macros, such as $MA, which
expands to the ATA MAC address.
Default setting: /spa$PSN.cfg
Profile Rule B:
Profile Rule C:
Profile Rule D
Defines second, third, and fourth resync commands and associated
profile URLs. These profile scripts are executed sequentially after
the primary Profile Rule resync operation has completed. If a
resync is triggered and Profile Rule is blank, Profile Rule B, C, and
D are still evaluated and executed.
Default setting: blank
DHCP Option To Use DHCP Options, delimited by commas, retrieves firmware and
profiles.
Default setting: 66.160.159.150
Transport Protocol Transport Protocol retrieves firmware and profiles. If none is
selected, TFTP is assumed and the IP address of the TFTP server is
obtained from the DHCP server.
Default setting: https
Log Resync Request
Msg
This parameter contains the message that is sent to the Syslog
server at the start of a resync attempt.
Default setting: $PN $MAC -- Requesting resync $SCHEME://
$SERVIP:$PORT$PATH
Log Resync Success
Msg
Syslog message issued upon successful completion of a resync
attempt.
Default setting: $PN $MAC -- Successful resync $SCHEME://
$SERVIP:$PORT$PATH
Log Resync Failure
Msg
Syslog message issued after a failed resync attempt.
Default setting: $PN $MAC -- Resync failed: $ERR
Field Description