Operation Manual

Configuring the Voice Settings
Provisioning
Cisco SPA100 Series Administration Guide 59
1
Provisioning
Use the Voice > Provisioning page to configure profiles and parameters to provision the ATA
from a remote server.
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Configuration Profile
Key System Auto
Discovery
To enable auto-discovery of the Cisco SPA9000 voice system,
choose yes. Otherwise, choose no.
Default setting: yes
Key System IP
Address
The IP address of the Cisco SPA9000.
Default setting: blank
Force LAN Codec If needed, specify a voice codec.
Default setting: none
Station Name Name to identify this IP phone; appears on the IP phone screen on
models that have a display. No spaces are allowed and the name
must be unique.
Default setting: blank
Field Description
Field Description
Provision Enable Controls all resync actions independently of firmware upgrade
actions. Set to yes to enable remote provisioning.
Default setting: yes
Resync On Reset Triggers a resync after every reboot except for reboots caused by
parameter updates and firmware upgrades.
Default setting: yes