Operation Manual

Configuring the Voice Settings
System
Cisco SPA100 Series Administration Guide 48
1
Miscellaneous Settings
Network Startup
Delay
The number of seconds of delay between restarting the voice
module and initializing network interface.
Default setting: 3
Field Description
DNS Query TTL
Ignore
In DNS packages, the server will suggest a TTL value to the client;
if this parameter is set to yes, the value from the server will be
ignored.
Default setting: no
Syslog Server Specify the syslog server domain name/IP and port. This feature
specifies the server for logging ATA system information and
critical events. If both Debug Server and Syslog Server are
specified, Syslog messages are also logged to the Debug Server.
Default setting: blank
Debug Server The debug server domain name/IP and port. This feature specifies
the server for logging debug information. The level of detailed
output depends on the debug level parameter setting.
Default setting: blank
Debug Level Determines the level of debug information that will be generated.
Select 0, 1, 2, 3, 3+Router, 3+Coma or 1+Coma from the drop-
down list. The higher the debug level, the more debug information
will be generated. Level 0 means that no information will be
collected. Levels 1, 2 & 3 generate messages related to the voice
ports only. Level 3+Router generates debug content for both voice
and router components.
Levels 1/3+ Coma generates vendor’s cordless debug content and
voice component.
Default setting: 3
Syslog Prefix Prefixes additional information to syslog with configuration set.
Default setting: blank
Field Description