Operation Manual

Configuring the Voice Settings
System
Cisco SPA100 Series Administration Guide 47
1
System
Use the Voice > System page to configure general voice system settings and to enable logging
by using a syslog server. (Logging also can be configured in the Administration > Logging
pages. For more information, see Logging, page 113.)
Requirements for Logging
• You need a computer that is on the same subnetwork as the ATA, to capture the log
files. This computer needs to be running a syslog daemon. Enter the IP address and the
port of this computer in the Syslog Server and Debug Server fields. Default port is 514.
• You can deploy a syslog server to receive syslog messages from the ATA, which acts as
a syslog client. The syslog client device uses the syslog protocol to send messages,
based on its configuration, to a syslog server. The syslog messages can be accessed by
reviewing the "syslog.514.log" file which is the default name resides in the same
directory as the slogsrv.exe syslog server application.
• Partners can download the Syslog Server for SPA Devices by using the link below
(login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/ps10499/
syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Custom CA Info The successfully downloaded CA information, or “Not
Installed” if no custom CA certificate was installed.
Default setting: Not Installed
Field Description
Field Description
Restricted Access
Domains
Domain that Cisco IP phones responds to SIP messages only from
the identified servers. Applicable to Line 1.
IVR Admin Passwd Password for the administrator to manage the ATA by using the
built-in IVR through a connected phone.