Operation Manual

Configuring the Voice Settings

Information

Cisco SPA100 Series Administration Guide 45

Line 1/Line 2 Status

SIP Bytes Recv Total number of bytes of SIP messages received (including

retransmissions)

External IP The External IP address used for NAT mapping.

Field Description

Hook State The hook state of the port: On or Off.

Registration State Indicates if the line has registered with the SIP proxy.

Last Registration At Last date and time the line was registered.

Next Registration In The number of seconds before the next registration renewal.

Message Waiting Indicates whether you have new voice mail waiting.

Indicates Yes when a message is received.

Mapped SIP Port Port number of the SIP port mapped by NAT.

Call Back Active Indicates whether or not a call back request is in progress. Options

are either yes or no.

Last Called Number The phone number that was most recently called through this port.

Last Caller Number The originating phone number of the call that was most recently

received through this port.

Call 1 and 2 State Indicates the state of calls.

Call 1 and 2 Tone The type of tone used by the call.

Call 1 and 2 Encoder The codec used for encoding.

Call 1 and 2 Decoder The codec used for decoding.

Call 1 and 2 FAX The status of the fax mode.

Call 1 and 2 Type The direction of the call. May take one of the following values:

• Inbound

• Outbound

Field Description