Operation Manual

Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 32
1
Time Settings
Use the Network Setup > Basic Setup > Time Settings page to set the system time for the ATA.
By default, the system time is set automatically by using a Network Time Protocol (NTP)
server. You can configure the system time manually. In addition, you can use this page to
specify your time zone, enable Daylight Saving adjustments, and modify related settings.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
User Manual
If you prefer to set the system manually rather than automatically obtaining the settings from
an NTP server, click User Manual and then enter the date and time.
Option 160 Provides a configuration URL to clients that request this option.
An option 160 URL defines the protocol and path information
by using a fully qualified domain name for clients that can use
DNS. For example:
https://myconfigs.cisco.com:888/configs/bootstrap.cfg
Default setting: blank
DNS Proxy When enabled, the DNS proxy relays DNS requests to the
current public network DNS server for the proxy, and replies as
a DNS resolver to the client device on the network. Click
Enabled to enable this feature, or click Disabled to disable it. If
DNS proxy is disabled, then DHCP clients will be offered DNS
server information by using the Static DNS servers, if defined,
or by using the using the servers specified for the INTERNET
(WAN) interface.
Default setting: Enabled
Field Description
Date Enter the date in the following order: four-digit year, month, day.
Time Enter the time in the following order: hour (from 1 to 24),
minutes, and seconds.
Field Description