Operation Manual

Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide 30
1
Default Gateway Enter the IP address of the default gateway to be used by the
DHCP clients.
Default setting: 192.168.15.1 (the IP address of the ETHERNET
(LAN) interface)
Starting IP Address Enter the first address in the range of addresses to be assigned
dynamically by the DHCP server.
Default setting: 192.168.15.100
Maximum DHCP
Users
Enter the maximum number of devices that can dynamically
receive, or “lease,” DHCP addresses from the DHCP server.
Default setting: 50
IMPORTANT: Typically, the ATA can support up to five
connected computers for business-related tasks such as web
browsing and viewing email. The ATA is not designed to
support streaming music, video, games, or other network traffic-
intensive tasks.
Client Lease Time Enter the number of minutes that a dynamically assigned IP
address can be in use, or “leased.” After this time elapses, a
client device has to request a DHCP lease renewal. Use 0 to
represent 1 day, 9999 never expire.
Default setting: 0
Field Description