Operation Manual

Getting Started
Mounting the ATA
Cisco SPA100 Series Administration Guide 18
1
Mounting the ATA
You can place the ATA on a desktop or mount it on a wall.
!
CAUTION To prevent the ATA from overheating, do not operate it in an area that exceeds an ambient
temperature of 104°F (40°C).
Desktop Placement
Place the ATA on a flat surface near an electrical outlet.
WA RN ING Do not place anything on top of the ATA; excessive weight could damage it.
Wall Mounting
The ATA has two wall-mount slots on the bottom panel. To mount the ATA on a wall, you
need mounting hardware (not included). Suggested hardware is illustrated (not true to scale).
Factory Reset of Unit
WARNING: All non-default
settings will be lost. This
includes network and service
provider data.
73738
RESET
When prompted, press 1 to
confirm, or press * (star) to
cancel. After you hear “Option
successful,” hang up the phone.
The ATA reboots.
Reboot of Voice System 732668
REBOOT
After you hear “Option
successful,” hang up the phone.
The ATA reboots.
IVR Action Menu
Option
Choices and Instructions