Operation Manual

Using the IVR for Administration
Cisco SPA100Series Administration Guide 132
1
• If the menu is inactive for more than one minute, the IVR times out. You will need to
re-enter the IVR menu by pressing the star key four times: ****. Your settings take
effect after you hang up the telephone or exit the IVR. The ATA may reboot at this
time.
• To enter the decimal points in an IP address, press the * (star) key.
For example, to enter the IP address 191.168.1.105, perform the following tasks:
–Press these keys: 191*168*1*105
–Press the # (pound) key to indicate that you have finished entering the IP address.
–Press 1 to save the IP address or press the * (star) key to cancel your entry and
return to the main menu.
IVR Actions
IVR Action Menu
Option
Choices and Instructions
Enter IVR Menu ****
Check Internet Addressing
Method
100
Set Internet Addressing
Method
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
Check Internet IP Address
(INTERNET port)
110
Set Static IP Address
(INTERNET port)
111 Enter the IP address by using numbers on
the telephone key pad. Use the * (star) key
when entering a decimal point.
Note: This option is available only after you
choose Static IP as the Internet Connection
Type, through option 101.
Check Network Mask 120