Operation Manual

Getting Started
Configuration and Management of the ATA
Cisco SPA100 Series Administration Guide 17
1
Set Gateway IP Address 131 To enter the value, press
numbers on the telephone key
pad. Press the * (star) key to
enter a decimal point.
Note: This option is available
only after you choose Static IP
as the Internet Connection
Type, through option 101.
Check MAC Address 140
Check Firmware Version 150
Check Primary DNS Server
Setting
160
Set Primary DNS Server 161 To enter the value, press
numbers on the telephone key
pad. Press the * (star) key to
enter a decimal point.
Note: This option is available
only after you choose Static IP
as the Internet Connection
Type, through option 101.
Check Internet web server port 170
SPA122 only: Check LAN IP
address (Ethernet port)
210
Announce Line 1 SIP
Transport
1910
Set Line 1 SIP Transport 1911 0: UDP
1: TCP
2: TLS
Check Line 2 SIP Transport 1920
Set Line 2 SIP Transport 1921 0: UDP
1: TCP
2: TLS
Exit IVR 3948
Allow or prevent WAN access
to the administration web
server
7932 1: Enable
0: Disable
IVR Action Menu
Option
Choices and Instructions