Manualshelf

Operation Manual

ManualsBrandsCisco ManualsInternet phoneCisco SPA112 VoIP
111112113114115116117118119120
Administration Settings
Reboot
Cisco SPA100Series Administration Guide 121
1
Restore Configuration
User the Administration > Config Management > Restore Configuration page to restore the
ATA configuration settings from a previous backup. It is recommended that you back up your
current configuration settings before you restore a configuration.
STEP 1 Click Browse to locate the .cfg file on your computer.
STEP 2 Click Restore to restore the settings from the selected file.
Reboot
Use the Administration > Reboot page to power cycle the ATA (if necessary) from the
configuration utility. Alternatively, accomplish this task by pressing the RESET button.
Click the Reboot button to power cycle the ATA. When the warning message appears, read the
information, and then click OK to reboot the ATA, or click Cancel to abandon the operation.
The ATA and any connected devices will lose network connectivity during this operation.