Operation Manual

Administration Settings
Diagnostics
Cisco SPA100Series Administration Guide 118
1
Diagnostics
The ATA includes two built-in diagnostic tools:
•Ping Test
• Traceroute Test
Ping Test
Use the Administration > Diagnostics > Ping Test page to test connectivity between the ATA
and a destination.
STEP 1 Enter the IP address or domain name that you want to ping.
STEP 2 Enter a packet size in bytes. The range is 32 to 65500 bytes.
STEP 3 Choose the number of times to send the ping request (5, 10, or Unlimited).
STEP 4 Click Start to Ping to start the test. After the test is complete, the test results appear on the
page. While the ping test is running, you can click Stop to abandon the test.
The test results indicate the number of packets sent and received, the percentage of packet
loss, and the round-trip speed.
STEP 5 Click Close to close the test results and display the Ping Test form.
Clear Log Click this button to remove all entries from the log.
Display Choose the type of content to display: All, kernel, or system.
Filter Enter a keyword to filter the log entries that appear in the viewer.
The page will display only the entries that include the keyword.
Field Description