Operation Manual

Administration Settings
Logging
Cisco SPA100Series Administration Guide 114
1
• Log Viewer
Log Module
Use the Administration > Log > Log Module page to enable and configure logging.
NOTE
• As a best practice, Cisco recommends that you enable logging only when needed, and
disable logging when you finish the investigation. Logging consumes resources and
can impact system performance.
• If you want to enable email or syslog server logging, first specify the email or syslog
server settings on the Log Setting page.
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Field Description
Status Click Enabled to enable logging, or click Disabled to disable
logging. The default setting is Disabled.
Log - Enable Check the box in the heading row to enable logging for all
services (kernel and system). Alternatively, check the box for
kernel or system to enable logging for that service.
Service The type of service to include: kernel or system.