Operation Manual

Administration Settings
Management
Cisco SPA100Series Administration Guide 110
1
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
Field Description
Status Click Enabled to enable remote provisioning, or click Disabled
to disable this feature. The default setting is Disabled.
ACS URL The URL for the ACS. The format should be http(s)://
xxx.xxx.xxx.xxx:port or xxx.xxx.xxx.xxx:port. The
xxx.xxx.xxx.xxx is the domain name or IP address of the ACS
server. Both the IP address and the port number are required.
ACS Username The username for the ACS. The default username is the
Organization Unit Identifier (OUI). This value is required and
must match the username configured on the ACS.
ACS Password The password for the ACS. This value is required and must
match the password configured on the ACS.
Connection Request
Port
The port to use for connection requests
Connection Request
Username
The username for connection requests. This value must match
the Connection Request Username configured on the ACS.
Connection Request
Password
The password for connection requests. This value must match
the Connection Request Password configured on the ACS.
Periodic Inform
Interval
If Periodic Inform is enabled, the duration, in seconds, between
CPE attempts to connect to the ACS. The default value is 86400
seconds.
Periodic Inform Enable Click Enabled to enable CPE connection requests to the ACS, or
click Disabled to disable this feature.
Request Download If applied, ACS may call the Download RPC after it receives the
request from the ATA.