Installation Guide
Table Of Contents
- Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
- Contents
- Product Description
- Deployment Mode-Standard Only; No HA or DR
- Steps to Get Up and Running with Cisco Security Manager
- BIOS Setup, OS Tuning, and Security Manager Tuning (these were done by Cisco before shipment of the Bundle to you)
- Performance Parameters
- Updates and Service Packs for Windows
- Patches and Service Packs for Security Manager
- Usernames and Passwords
- Windows Activation, Product Key, and EULA
- Windows Drivers for the UCS Server
- Updates and Service Packs for the UCS Server
- Cisco Security Manager License
- IP Address and Hostname
- Recovery Media and Recovery Procedure
- If You Need to Return Your Bundle to Cisco
- Related Documentation
7
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
78-21007-01
Windows Activation, Product Key, and EULA
• To change the Security Manager admin username/password: In Security Manager, select Tools >
Security Manager Administration > Server Security, then click Local User Setup.
Security Manager casuser:
• Default casuser username/password: casuser/[Note: password is generated by Security Manager
during installation]
• To reset the casuser password, follow the procedure for resetCasuser.exe in the Installation Guide
for Cisco Security Manager 4.3 at
http://www.cisco.com/en/US/products/ps6498/prod_installation_guides_list.html.
Windows Activation, Product Key, and EULA
Activation of the OS [Microsoft Windows Server 2008 R2 SP1 Enterprise (64-bit)] must be done by you
before the activation period expires. To activate the OS, use the Microsoft Certificate of Authenticity
(COA) label; the COA label is placed on the recovery media provided with your new Bundle. For more
information on activating the OS, refer to “Product Activation,” published by Microsoft at the following
URL: http://www.microsoft.com/windowsserver2008/en/us/product-activation.aspx.
You can view your product key by using normal Microsoft procedures: On the Control Panel, select
System and refer to the information under “Windows Activation.”
To activate the OS, use the Physical Key. Do not use the Virtual Key. Refer to the following illustration.
The Windows EULA (end user license agreement) is described in a printed document that you will find
packed in your shipping carton.
Windows Drivers for the UCS Server
The required Windows UCS drivers are pre-installed in your new Bundle.
If necessary, you can download these drivers at the following URL:
http://www.cisco.com/cisco/software/type.html?mdfid=284296253&i=rs