User Guide

RPU Menu Options
– Wait After Reboot Done (sec). Number of seconds to wait after the
RFGW1 reboots before continuing with processing. The RPU uses a ping
command to determine if the RFGW1 rebooted. This extra wait time after
the ping has responded allows other RFGW1 services to become
operational.
 Reference SW Version Match Override - The RPU compares the software
versions of the RFGW1 being programmed and the reference RFGW1. If the
versions do not match, the RPU will not program the RFGW1 unless the
Override Reference SW Match option is selected.
Lower 48 Frequencies and TSIDs in Upgrade to 96 Channels - The default
action when in upgrade mode is to only update the upper 48 channels with the
Frequency and TSID information configured into the SDV Design File
spreadsheet. This option permits the upgrade of the RFGW1 database files to
include the lower 48 Frequency and TSID information as well. This can be useful
on a network where a new frequency and/or TSID plan is part of the network
upgrade process.

4035993 Rev A 35