User Guide

Chapter 3 Installation and General Operation
Configure M uen
The Configure Menu allows the user to configure the following.
 RFGW1 FTP Account Information - The RPU must have the FTP account
information to log onto the RFGW1.

get
file r reboot.
– after uploading DB - Checking this box configures the
– boot Start Limit (sec). Number of seconds to wait for the RFGW1
– boot Done Limit (sec). Number of seconds to wait for the RFGW1
to complete the reboot process. If the RFGW1 has not completed the
reboot process after the amount of seconds displayed, this is considered a
failure.
RFGW1 Reboot Options and Limits - The RPU must reboot the RFGW1 to
the new database files created by the RPU to become the active database
s. The following parameters configure the actions and timeouts fo
Wait for reboot
RPU to wait for an RFGW1 to completely reboot after the programming
action before continuing on to any other RFGW1s selected to be
programmed.
Wait Re
to start the reboot process. If the RFGW1 has not started the reboot
process after the amount of seconds displayed, this is considered a
failure.
Wait Re
34 4035993 Rev A