User Guide

Chapter 3 Installation and General Operation
Set Channel Mute
This feature allows the user to bulk provision one or more of the RF Gateways port
channel mute setting.
1 From the
Hub List window, select desired Hub.
All units configured for this Hub are displayed. Result:
2 From the
Select RFGW window, select the unit for which you would like to set
channel mute.
Note: To display data for more than one unit, hold down the <ctrl> key and click
an additional list element, or hold down the <shift> key to select a range of units.
3 In the
Select Ports dialog window, select the desired port to configure.
4 In the
Select Chans window, select the port channels to configure.
5 Set the channel mute state from the
Set Channel Mute drop-down box.
6 Click the
box. Set Channel Mute is Active
drop-down box.
7 Set the channel application mode from the
Set App Mode
8 Click the
Set App Mode is Active box.
9 Click
. Send Update
The status log display the results of all SNMP set commands. Result:
32 4035993 Rev A