User Guide

RFGW1 Bulk Provisioning

The status log displays the results of all SNMP set commands. Result:

Set Combined Channels (Phase 3 Step 3b)

This feature allows the user to bulk provision one or more RFGWs RF port combined

channels.

1 From the

Hub List, select desired Hub.

All units configured for this Hub are displayed. Result:

2 From the

Select RFGW box, select the unit for which you would like to set

combined channels.

Note: To display data for more than one unit, hold down the <ctrl> key and click

an additional list element, or hold down the <shift> key to select a range of units.

3 In the

Select Ports dialog box, select the desired port to configure, or to choose

multiple ports, select one of the following options located at the bottom of the

Select Ports box:

- All

- Group 1

- Group2

4 Click

Send Update

The status log displays the results of all SNMP set commands. Result:

4035993 Rev A 31