User Guide

Creating Databases and Programming the RFGW1
3 Once the data has been verified as accurate, click Data OK.
Creating RFGW1 Configuration Database (Phase 2 Step 2b)
Follow the instructions below to create the configuration database(s).
window, select the desired HUB to configure.
1 From the
Select HUB
All units configured for this HUB are displayed in the Select RFGW Result:
dialog box.
2 Highlight the unit(s) for which you want to create a configuration database.
Status of Db UpdateResult: window displays the configuration data for all unit(s)
selected.
Note: To create databases for more than one unit, hold down the <ctrl> key and
click an additional list element, or hold down the <shift> key to select a range of
units.
.
3 Click
Create Configuration DB File
The configuration database files are created for each unit selected. Result:
Note: If a single RFGW is selected, the RPU displays the current status of each step
in the database creation, programming, and verification process.
4035993 Rev A 25