User Guide

Chapter 3 Installation and General Operation
Creating Databases and Programming the RFGW1
After the provisioning data has been imported, the user is ready to create databases
and program the RFGW1 devices.
Verifying SDV Design File Spreadsheet Configuration Data (Phase 2 Step 2a)
This step allows the user to manually verify configuration data imported from the
SDV Design File spreadsheet. Make sure to check all imported data for each unit.
Follow the steps below to verify configuration data imported from the SDV Design
File.
1 From the
Select Hub window, select the desired hub.
All RFGW1s are displayed for this Hub. Result:
Note: The user can choose how information is displayed by using the drop-down
box to select the following options:
 RFGW
 Service Group
 SDV Server
window, select one or more units to display and verify.
2 In the
Select RFGW
Result: The RFGW Port List box displays the configuration data for the RF
outputs of the unit(s) selected. The RFGW Video IP Info box displays the
configuration data for the GbE inputs.
24 4035993 Rev A