User Guide

Initial Provisioning Mode

The RPU can perform initial provisioning for both 48 and 96 channel RFGW1

models. The RPU uses the

MAX QAM column of the Device_Info tab of the SDV

Design File to determine whether the RFGW1 is intended to be provisioned with 48

or 96 channels of data.

Importing Provisioning Parameters

Before starting the provisioning procedure, you must import the Reference Database

and the SDV Design File. Refer to

Importing Reference Database (Phase 1 Step 1c)

(on page

21) and (on page Importing SDV Design File Spreadsheet (Phase 1 Step 1d)

22).

Configure RPU Repository Location (Phase 1 Step 1a)

This feature configures the disk file location where the RPU maintains all of the files

created and referenced by the RPU. The user can locate the RPU repository on a

shared network drive if desired.

To configure the repository, follow the instructions below.

1 Click Set RPU Repository Dir Path and enter the location of the repository path.

See screen below.

2 Click

Test RPU Repository Dir Path.

Result: Indicates whether the RPU repository is present and ready for running

the RPU.

3 Click

and enter desired name in the User Name window. Set User Name

This name is logged in the RPU log file. Result:

4035993 Rev A 19