User Guide

Provisioning Overview
Note: The RPU will not create databases or configure GQAM type devices.
GQAM configuration data will be used in the Data Integrity Tests, and the
GQAM data will be displayed in the RPU data display dialogs.
 Max QAM - Identifies the number of QAM channels for the entire device. 48
or 96 are the supported values.
The following parameters are included in Port and Channel Frequency and TSID
Configuration:
 SG ID - Service Group ID to which this port is assigned.
This SGID must be configured in the SG_Info sheet. Note:
 Primary USRM - Name of the Primary USRM (SDV Server) to which this port
is configured.
 Backup USRM - Name of the Primary USRM (SDV Server) to which this port
is configured.
 Freq 1 - The base frequency assigned to channel 1.
This frequency must be a standard frequency. Note:
 nels 1 to 4. TSID 1 to 4 - The TSID assignments for TSID settings for chan
 Freq 5 - The base frequency assigned to channel 1.
Note
: This frequency must be a standard frequency.
 TSID 5 to 8 - The TSID assignments for TSID settings for channels 5 to 8.
4035993 Rev A 13