User Guide

Chapter 2 Provisioning
The following screen shows the Device_Info spreadsheet.
The RPU data is divided into two major sections:
 Identification and IP Configuration
 Port and Channel Frequency and TSID Configuration
The following parameters are included in Identification and IP Configuration:
 Headend - Name of the Headend the RFGW1 is configured with on the
network.
 Hub - Name of the installation location.
 Equipment Name - Name of the RFGW1 configured for the equipment name
database field.
 Management IP, Gateway, Mask, MAC - IP configuration parameters for the
management port.
 Port IP, Mask, Virtual IP - Gbe input port IP configuration parameters.
If the value for any of the Virtual IP address fields are set to Note: independent,
the dat
abase field Gbe Data Port Mode will be set to Four Port Independent.
QAM Type - Identifies the type of QAM device. GQAM and RFGW1 are the 
only supported types.
12 4035993 Rev A