User Guide

4-7
Cisco TEO Adapter Guide for SAP ABAP
OL-24780-02
Chapter 4 Managing Triggers
Managing Triggers
Step 11 Click OK to complete the trigger definition and close the dialog box.
Managing Triggers
This section provides information on managing trigger properties. Use the Triggers tab on the process
Properties dialog box to manage the triggers.
Enabling a Trigger
A trigger is enabled by default after it is created. If a trigger is manually disabled, it must be enabled
before it is available for execution.
Step 1 On the process Properties dialog box, click the Triggers tab.
Step 2 Select the trigger in the list, right-click and choose Enable.
Disabling a Trigger
Disabling a trigger prevents it from being available for execution but does not remove it from the process
definition.
Step 1 On the process Properties dialog box, click the Triggers tab.
Step 2 Select the trigger in the list, right-click and choose Disable.
Modifying a Trigger
You can modify the properties of a trigger from the Triggers tab on the process Properties dialog box.
Step 1 On the process Properties dialog box, click the Triggers tab.
Step 2 Select the trigger in the list, right-click and choose Properties.
Step 3 Click the CCMS Alert tab to modify the alert criteria.
Step 4 Click OK to save your changes and close the dialog box.