User Guide

1-7
Cisco TEO Adapter Guide for SAP ABAP
OL-24780-02
Chapter 1 Understanding the SAP ABAP Adapter Objects
Viewing SAP ABAP Adapter Properties
Step 2 Review the following information about the adapter prerequisites:
Installing SAP .NET Connector Files
The SAP ABAP Adapter requires the SAP .NET Connector 3.0 for .NET 4.0 on x64 version 3.0.7.0 or
higher. Before you can create an SAP ABAP target, the dll files must be installed on the TEO server.
SAP .NET Connector 3.0 for .NET 4.0 on x64 v3.0.7.0 can be downloaded from the SAP web site.
Step 1 From the SAP .NET Connector 3.0 for .NET 4.0 on x64 program files folder on the server where NCo
is installed, locate the following files:
• sapnco.dll
• sapnco_utils.dll
Step 2 Copy the files to the following folder on the TEO server:
<Install drive>:\Program Files\Cisco\Tidal Enterprise Orchestrator\Adapters
Step 3 Restart the Tidal Enterprise Orchestrator Server service.
Column Description
Name Name of the required hardware or software for the
supported adapter.
Importance Indicates whether the item is Required or Optional for the
adapter.
State Indicates whether the system has the required hardware or
software installed (Satisfied or Not satisfied).
Minimum Value Indicates the minimum value required for the item.
Detected Value Displays the software or hardware version on the system.
Explanation Display only. Information related to the selected adapter
requirement.