Data Sheet

Data Sheet
© 2001-2003, 2007-2008, 2010, 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 12
ICIM2
Intelligent Communications Interface Module 2 (ICIM2)
Features
 Functions as the interface between the Prisma II modules and the
ROSA/Transmission Networks Control Systems (TNCS)
communications bus
 Supports Web Browser and Command Line Interface (CLI) for local
and remote management
 Provides early warning of systems faults
 Blind-mate (push-on) connectors for power and data provide
complete front access for simplified installation and maintenance
 Allows local module configuration and status monitoring for up to
150 modules
1
or 10 chassis, whichever comes first, including:
 Prisma II Chassis
 Prisma II High Density Chassis
 Prisma II XD Chassis
 Prisma HDRx Chassis
 SNMP Ethernet interface
 LCD display and keypad
 ROSA/TNCS compatible
 Remote control and monitoring of individual modules
 SNMP compatible
 Firmware can be upgraded by remote download
Ethernet
Element Manager Interface
RS-485
Local Craft Interface
RS-232
Microprocessor
Hardware
Interface
Backplane
ICIM2 Module
Prisma II Chassis
Configuration bus
Monitoring bus
Hardware
Interface
Hardware
Interface
Hardware
Interface
ICIM2 to Module Interface
RS-485
RJ-45
KEY PAD
LCD
DISPLAY
BACKPLANE
CONNECTOR
DB9
DB9
DB9
Hardware
Interface
DB9
CLI (command line interface)
Note:
1. The polling rate is approximately 1 second per module. Assign the number of modules per ICIM2 accordingly.