Data Sheet

ManualsBrandsCisco ManualsDigital ReceiversCisco PowerVu Model D9850 Program Receiver

Model D9844

Commercial Decoder

Description

The Model D9844 Commercial Decoder is

designed to receive broadcasts using MPEG-2

4:2:0 digital compression technology. It is ideally

suited for decoding digitally compressed signals for further distribution into direct-to-home networks. Optional IP

input or output interfaces provide for next generation network architecture integration.

Secured Broadcast Reception

Availability of BISS modes 1 and E provides protected distribution of video, audio and/or data broadcasts to

multiple locations. To further support interoperability, DVB-CI allows the receiver to be used in different broadcast

networks with the most common conditional access (CA) systems.

Key Features

• Single or dual decoder configuration

• MPEG-2/DVB 4:2:0 video decoding

• NTSC, PAL B/G/I/M/N/D, SECAM L/B/G/K1 video formats

• Video resolution interpolation (Pan-Scan, letter box or pass-through)

• Aspect ratio conversion (4:3, 16:9)

• Configured and controlled via front panel LCD

• Supports Basic Interoperable Scrambling System (BISS) conditional access

• Two analog stereo outputs per program

• VBI re-insertion of WST, WSS, VPS, VITC, CC, AMOL I, AMOL II

• EBU Teletext and DVB subtitling

• Redundancy support via two General Purpose Indicator (GPI) contact closures

• SNMP control and monitoring

• Web-based management (10/100 Base-T)

• Two-slot, DVB-CI common interface

Optional Features

• Dolby

Digital (AC-3) downmixing (left and right channels)

• DVB-S QPSK input

• DVB-S2 Single Input QPSK/8PSK

• DVB-S2 16APSK, VCM, ACM

• Multiple input transport stream (MSI)

• ASI input

• Dual ASI outputs

• MPEG over IP input (without FEC)

• Link and source redundancy for IP inputs

• MPEG over IP output (without FEC)

• MPE IP Data output

• Two SDI outputs with embedded audio and VBI

• Two AES/EBU digital audio outputs per program

• Second video decoder with two audio outputs

Summary of content (5 pages)

PAGE 1
Model D9844 Commercial Decoder Description The Model D9844 Commercial Decoder is designed to receive broadcasts using MPEG-2 4:2:0 digital compression technology. It is ideally suited for decoding digitally compressed signals for further distribution into direct-to-home networks. Optional IP input or output interfaces provide for next generation network architecture integration.
PAGE 2
Specifications Feature System Description MPEG-2/DVB compatible DVB Satellite – QPSK Frequency Range: 950 MHz to 2150 MHz Symbol Rate Range: 1.0 to 45 Msymbols/s L-band RF input with LNB control and loopthrough output Transport Stream Inputs and Outputs DVB S2 Single Input – QPSK/8PSK 16APSK software option Frequency Range: 950 MHz to 2150 MHz Symbol Rate Range: 1.
PAGE 3
Sample Rear Panel Configurations Single Decoders 4012444 and 4012746 4012445 (shown with MPEG over IP Input) 4012448 and 4013196 Page 3 of 5
PAGE 4
Ordering Information (see examples above) Factory-configured units Part Number DVB-S Input 4012444 √ 4014373 √ DVB-S2 Input MPEG over IP Input w/o FEC ASI Input √ √ 4012445 4013490 √ 4012746 √ Dual ASI O/Ps SDI Out 1st/2nd AES/EBU Outputs √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 4013196 √ √ 4014372 √ 4017834 √ √ √ √ √ √ √ √ √ 4019412 √ √ √ √ √ √ √ 4019411 √ √ √ 4012448 4017835 √ √ √ Dolby Digital (AC-3) Down mixing √ √ √ 4012447 4019448 Genl
PAGE 5
Dual Decoders 4012449 4012451 Ordering Information (see examples above) Part Number DVB-S Input 4012449 √ MPEG over IP Input w/o FEC ASI Input Dual ASI O/Ps IP Data & MPEG over IP Output Genlock SDI Outputs rd th 3 /4 Analog Stereo Outputs st nd rd th 1 /2 AES/EBU Outputs 3 &4 AES/EBU Outputs √ √ √ 4012450 √ 4012451 √ √ √ √ Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, and ROSA are trademarks or registered trademarks of Cisco Systems, Inc.