Manual

SaMOG Gateway Offline Charging
▀ Configuring the SaMOG CDRs
▄ SaMOG Administration Guide, StarOS Release 17
76
Command
Default
Comment
Call Control Profile Configuration
accounting mode gtpp
gtpp
Enabled
Enable this command to generate the bearer based SaMOG CDRs.
accounting context <context> [
gtpp group <group> ]
GTPP group
Default
If GTPP group is not configured, the default value is used. If the
accounting context is not configured, SaMOG service context is
used.
cc { behavior-bit no-records
bit_value | local-value
behavior bit_value profile
index_bit | prefer { hlr-hss-
value | local-value } }
no cc behavior-bit no-records
remove cc { behavior-bit no-records |
local-value | prefer }
None
Enabled
Specifies how the Charging Characteristics should be selected in
SaMOG.
This command defines the charging characteristics to be applied for
CDR generation when the handling rules are applied via. the
Operator Policy feature.
associate accounting-policy
<name>
Not
associated
The accounting policy configured various Sgw-CDR triggers for the
CC profiles. If no policy is configured then triggers based on CC
will not be generated and the Accounting policy in SaMOG service
context is used.
APN Profile Configuration
accounting mode gtpp
gtpp
Enable this command to generate the bearer based SaMOG CDRs.
If not configured, the configuration under the CC profile is used.
accounting context <context> [
gtpp group <group> ]
GTPP group
Default
If this command is not configured, the configuration under the CC
profile is used.
associate accounting-policy
<name>
Not
associated
If this command is not configured, the configuration under the CC
profile is used.