Manual

SaMOG Gateway Offline Charging
SaMOG CDR Formats
SaMOG Administration Guide, StarOS Release 17
69
Field
Category
Description
Serving Node
Address
OC
List of serving node control plane IP addresses (e.g. S-GW, SaMOG) used during record
generation.
MRME service IP address.
Serving Node Type
OC
List of serving node types in control plane.
PGW PLMN
Identifier
OC
PLMN identifier (MCC MNC) of the P-GW used.
Received in the APN OI part in PBU. For SaMOG 3G license, it will be set to GGSN PLMN
ID.
Access Point Name
Network Identifier
OM
Logical name of the connected access point to the external Packet Data Network (network
identifier part of APN).
Received in Service Selection AVP in DER from AAA. If this field is not received in the DER,
the session goes down.
PDP/PDN Type
OM
This field indicates PDN type (i.e IPv4, IPv6 or IPv4v6).
Set to IPv4. Received from AAA in DEA.
Served PDP/PDN
Address
OC
IP address allocated for the PDP context/PDN connection, i.e. IPv4 or IPv6, if available.
Allocated IP address.
Dynamic Address
Flag
OC
Indicates whether served PDP/PDN address is dynamic.
This field will always set, as static address is not supported.
List of Traffic Data
Volumes
OM
List of changes in charging conditions for IP CAN bearer, categorized based on traffic
volumes/per traffic period or changed QoS.
Generated by the SaMOG Gateway.
Record Opening
Time
M
Time stamp when IP CAN bearer is activated in S-GW, or record opening time on subsequent
partial records.
Generated by the SaMOG Gateway.
Duration
M
Duration of this record in the S-GW.
Cause for Record
Closing
M
The reason for the release of record from S-GW.
Values:
normalRelease
abnormalRelease
volumeLimit
timeLimit
maxChangeCond
managementIntervention
Diagnostics
OM
A more detailed reason for the release of the connection.
Record Sequence
Number
C
Partial record sequence number, only present in case of partial records.
A running sequence number with range of 1 through 4294967295 used to link partial records
generated by the SaMOG for a specific bearer context (characterized with the same Charging
ID and SaMOG address pair). This field will not be present if the first record is also the final
record.