Manual

SaMOG Gateway Offline Charging
▀ SaMOG CDR Formats
▄ SaMOG Administration Guide, StarOS Release 17
68
SaMOG CDR Formats
As 3GPP specifications does not define a CDR format for SaMOG, the S-GW CDR and SGSN CDR record formats are
used to define the CDR formats. The record format can be selected using a CLI command under the GTPP Group
Configuration Mode. By default, for an SaMOG license, the S-GW record type is used, and for an SaMOG 3G license,
the SGSN record type is used.
This section provides a reference for the S-GW and SGSN CDR fields supported by SaMOG.
The category column in all tables use keys described in the following table.
Table 14. Dictionary Table Key
Abbreviation
Meaning
Description
M
Mandatory
A field that must be present in the CDR.
C
Conditional
A field that must be present in the CDR if certain conditions are met.
OM
Operator Provisionable:
Mandatory
A field that an operator has provisioned and must be included in the CDR for all
conditions.
OC
Operator Provisionable:
Conditional
A field that an operator has provisioned that must included in the CDR if
certainconditions are met.
SaMOG S-GW CDR Format
The following table lists the S-GW CDR fields present in the available GTPP dictionary used by the SaMOG Gateway.
Table 15. SaMOG S-GW CDR Format
Field
Category
Description
Record Type
M
S-GW IP CAN bearer record.
Set to S-GW record type.
Served IMSI
M
IMSI of the served party.
Received in User name Radius AVP from WLC.
S-GW Address used
M
The control plane IP address of the S-GW used.
CGW service IP address.
PDN Connection
Charging ID
OM
Charging ID of the EPS default bearer in GTP case.
Set to befault bearer charging ID. SaMOG only supports default bearer setup. Therefore, the
PDN connection charging ID and charging ID will be the same.
Charging ID
M
IP CAN bearer identifier used to identify this IP CAN bearer in different records created by
PCNs.
Provided by P-GW in Create session response.