Manual

Configuring the SaMOG Gateway
Configuring the System to Perform as a SaMOG Gateway ▀
SaMOG Administration Guide, StarOS Release 17 ▄
53
Required Information
Description
MRME service name
The name of the MRME service to associate with this SaMOG service. This is the
MRME service name configured previously in this procedure.
CGW service name
The name of the CGW service to associate with this SaMOG service. This is the CGW
service name configured previously in this procedure.
Subscriber map name
The subscriber map name to associate with the SaMOG service. This name must match
the subscriber map name configured later in this procedure.
LTE Policy Configuration
Subscriber map name
The name of the subscriber map to associate with the LTE policy, which can be from
which can be from 1 to 64 alpha and/or numeric characters.
Precedence priority
Specifies the prcedence for the subscriber map. Must be an integer from 1 to 1024.
Service criteria type
Specifies the service criteria that must be matched for the subscriber map. Must be one
of imsi, service-plmnid or all.
MCC number
The Mobile Country Code for use in this LTE policy.
MNC
The Mobile Network code for use in this LTE policy.
Operator policy name
The name of the operator policy use with the subscriber map, which can be from 1 to
64 alpha and/or numeric characters.
TAI mgmt db name
The name of the Tracking Area Identifier database for use with the LTE policy, which
can be from 1 to 64 alpha and/or numeric characters.
GTPU and EGTP Service Configuration
SaMOG context name
The name of the SaMOG context configured previously.
EGTP service name
The name for this EGTP service, which can be from 1 to 63 alpha and/or numeric
characters.
EGTP service name
The name of the EGTP service name that you want to associate with the GTPU service.
This is the EGTP service name configured previously.
IPv4 address
The IPv4 address to which you want to use to bind the EGTP service to the GTPU
service.
GTPU service name
The name of the GTPU service, which can be from 1 to 63 alpha and/or numeric
characters.
IPv4 address
The IP address to which the GTPU service will bind.
AAA and Diameter Endpoint Configuration
AAA context name
The name assigned to the AAA context, which can be from 1 to 79 alpha and/or
numeric characters.
AAA interface name
The name assigned to the AAA interface, which can be from 1 to 79 alpha and/or
numeric characters.
IPv4 address/subnetmask
The primary IPv4 address and subnetmask for use by the AAA interface.
IPv4 address subnetmask
The secondary IPv4 address and subnetmask for use by the AAA interface.