Installation Guide

Operating using Console Software, Continued
The table below lists the basic parameters of the OptoStar II 1550 nm optical
amplifier module.
Basic Parameter Description
Module Name and Firmware
Version
Shows the module name and its firmware
version
Type of the Optical Amplifier Shows the type of the optical amplifier
Output Port Shows number of optical output ports
Module Temperature Shows the current module temperature (°C)
Optical Input Power Shows optical input power (dBm)
Optical Output Power Shows optical output power (dBm)
Laser Temperature Shows laser temperature (°C)
Drive Current Shows laser drive current (mA)
Cooling Current Shows laser cooling current (mA)
Laser Temperature Shows laser temperature (°C)
S/N Shows module serial number
Rack ID Shows the ID of the rack where the chassis
is placed
Slot ID Shows the ID of the slot where the module
is placed
Alarm Code Shows the current module alarm code; See
Alarm Code List (on page 3-14)
Continued on next page
OL-29666-02 Operation 3-21