Installation Guide

Operating using ICIM LCD, Continued
Sub-menu 7 -- Alarm List
The illustration below shows sub-menu 7 of the OptoStar II 1550 nm optical
amplifier module – Alarm List.
You can view the alarm information of the OptoStar II 1550 nm optical amplifier
module.
• If there is no alarm, the Alarm List shows “None”.
• If there is any alarm, the Alarm List shows the alarm information and its code,
as shown in the illustration below. See Alarm Code List (on page 3-14) for
detailed alarm codes.
Continued on next page
OL-29666-02 Operation 3-13