Installation Guide

Operating using NMS Software, Continued
The table below lists the basic parameters of the OptoStar II power supply
module.
Basic Parameter Description
Module Basic Information
Module Node Location Shows the IP of the node where the module
is located
S/N Shows module serial number
Slot ID Shows the ID of the slot where the module
is placed
Module Firmware Version Shows module firmware version
Module Temperature Shows the current module temperature (°C)
Output Voltage Shows output voltage (V) of the module
Output Current Shows output current (mA) of the module
Output Power Shows output power (W) of the module
Fan Status Shows whether the fan of the power supply
module is in normal status
OL-29659-03 Operation 3-25