Installation Guide

OptoStar II Platform, Continued
OptoStar II Optical Transmission Platform
OptoStar II Platform Power Supply Module
OptoStar II Chassis Configuration Diagram
• Guide slot 1 to 17 (from left to right)
• Guide slot 1 is used for intelligent communication interface module
• Guide slot 2/3 is used for main Power Supply
• Guide slot 4/5 is used for redundant Power Supply. When using a single power
supply, it can also be used for other application modules
• Guide slots 6 to 17 can be used for any application module
• All unused slots in the frame must be mounted with blank panels to maintain
the normal heat radiation environment
1-4 Introduction OL-29659-03