Technical References

17
LOCN is the associated with aparticular command. Identifies the location from which the PM
mode is to be retrieved. The parameter type is LOCATION, which is the location where the action
is to take place.
DIRN is the PM count retrieval direction. The parameter type is DIRECTION, which is the
transmit and receive directions.
Input Example:
RTRV-ALM-ALL:COTATI:ALL:229::MN,PWRRESTART,NSA,NEND,RCV;
Response Format:
SID DATE TIME
M CTAG COMPLD
“[<AID>],[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,<OCRDAT>,
<OCRTM>,,:[<DESC>],[<AIDDET>]”
;
AID shows the port in question.
AIDTYPE shows the type of the port.
NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),
MN (minor), NA (not alarmed), and NR (not reported).
CONDTYPE is the type of alarm condition.
SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service
affecting) or SA (service affecting).
OCRDAT is a date.
OCRTM is a time.
DESC is a condition description.
AIDDET is the supplementary equipment identification.
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“SLOT-2,EQPT:MN,PWRRESTART,NSA,08-01,14-25-59,,:\“POWER FAIL RESTART\”,DS1-14”
;
RTRV-COND-ALL
Use the RTRV-COND-ALL command to retrieve all of the conditions on the system.
RTRV-COND-ALL is from the Fault category.
Input Format:
RTRV-COND-ALL:[<TID>]:[<AID>]:<CTAG>::[<TYPEREQ>],[<LOCN>],[<DIRN>];