Technical References

RTRV-T1

Use the RTRV-T1 command to retrieve configuration information on a DS1 port. RTRV-T1 is from

the Ports category.

Input Format:

RTRV-T1:[<TID>]:<AID>:<CTAG>[::::];

• TID is the name of the node you want to access. If you only want to query the node you connected

to leave the TID blank.

• AID is the access identifier to indicate slot and port.

• CTAG is any non-blank character series that does not have to be unique.

Input Example:

RTRV-T1:TID:FAC-2-1:1223;

Response Format:

SID DATE TIME

M CTAG COMPLD

“<AID>::[LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],[TACC=<TAP>],[TAPTYPE=<TA

PTYPE>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[SFBER=<SFBER>],[SDBER=<SDBER>],[

NAME=<NAME>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[RETIME=<RETIME>],

[AISONLPBK=<AISONLPBK>],[AISVONAIS=<AISVONAIS>],[AISONLOF=<AISONLOF>],[MOD

E=<MODE>],[SYNCMAP=<SYNCMAP>],[ADMSSM=<ADMSSM>],[PROVIDESYNC=<PROVIDE

SYNC>],[VTMAP=<VTMAP>],[INHFELPBK=<INHFELPBK>],[BERTMODE=<BERTMODE>],[BE

RTPATTERN=<BERTPATTERN>],[BERTERRCOUNT=<BERTERRCOUNT>],[BERTERRRATE=<

BERTERRRATE>],[BERTSYNCSTATUS=<BERTSYNCSTATUS>]:<PST>,[<SST>]”

;

• AID is the access identifier to indicate slot and port.

• LINECDE is a line code. Values are AMI or B8ZS.

• FMT is a frame format. Values are D4, ESF, or unframed.

• LBO is a line build out. Values are 0-131, 132-262, 263-393, 394-524, or 525-655.

• TAP defines the STS as a test access port with a selected unique TAP number. The TAP number is

in the range of 0, 1–999. When TACC is 0 (zero), the TAP is deleted.

• TAPTYPE is the test access point type. Values are DUAL or SINGLE.

• SOAK - IS-AINS to IS transition soak time as measured in 15 minute intervals, so a value of 4

translates to a soak time of 1 hour. The allowable range is 0–192 intervals (maximum of 48 hours).

• SOAKLEFT is the time remaining for the transition from OOS-AINS to IS measured in 1 minute

intervals.

• SFBER identifies port SFBER; valid values are 1E-3, 1E-4 or 1E-5.

• SDBER identifies port SDBER; valid values are 1E-5, 1E-6,...1E-9.

• NAME is the name.